Reference Guide

--extendposttime
Valid Argument 0, 5, 10
Description
Delays the time of action taken by the system after pressing function keys such as F2,F12, etc.
during post time.
• 0 — Does not delay the time of action.
• 5— Delays the time of action by ve seconds.
• 10 — Delays the time of action by ten seconds.
--extwlanled
Valid Argument enable, disable
Description
Enables or disables the external (lid-mounted) WLAN indicator LED.
• enable—The LED displays the state of the WLAN source activity.
• disable—The LED does not display the state of the WLAN source activity.
--fanctrlovrd
Valid Argument enable, disable
Description Controls the speed of the fan.
--fanspeed
Valid Argument
auto, high, medium, medium_high, medium_low, low
Description Sets the speed of the fan. If set to auto the system run-time sets the speed of the fan.
--fanspeedctrllevel
Valid Argument
Integers ranging from 0 to 100
Description
Congures the fan speed control if the fan speed is set to Auto using fanspeed attribute. 0 sets
the fanspeed to the optimal speed level, and higher percentage provides enhanced cooling.
--fanstealthmode
Valid Argument
unchanged, turno
Description
Congures the state of the fans depending on the Stealth mode is enabled or disabled.
• unchanged — Retains the current state of the fan.
• turno — Turns o the fan if the stealth mode is enabled.
--fastboot
Valid Argument
thorough, minimal, automatic
Description
Enables fast booting.
• thorough — Sets POST to perform complete hardware and conguration testing.
• minimal — Sets POST to perform minimal hardware testing.
45