Reference Guide
--emmcdevice
Valid Argument enable, disable
Description
Enables or disables the eMMC drive.
--encalvememorysize
Valid Argument Read-only
Description Displays the memory allocation size for the Intel Software Guard Extension (SGX) processor
reserved memory.
NOTE: You cannot set the Enclave Reserve Memory Size using the Dell Command |
Congure user interface. One of the methods of setting Enclave Reserve Memory Size
is from the BIOS setup screen.
--energystarlogo
Valid Argument enable, disable
Description Displays or hides the Energy Star logo during POST.
--esataport
Valid Argument
auto, o
Description Sets the external Serial ATA (e-sata) port to auto or o.
--esataports
Valid Argument
enable, disable
Description Enables or disables all e-sata ports. If the system supports a dock, this status is also applicable to
all e-sata ports on the dock.
--expresscard
Valid Argument
enable, disable
Description Enables or disables the express card port that allows the user to insert an express card to
congure it.
--expresscharge
Valid Argument
enable, disable, once
Description Enables or disables the express charge battery charge algorithm. The once argument enables the
system to use express charge algorithm for one charge cycle.
--externalhotkey
Valid Argument
disable, scrolllock
Description Enables or disables the external keyboard hot-key feature. Scrolllock allows the Scroll Lock key on
an external keyboard to act as the <Fn> key on the internal keyboard.
44