Reference Guide

--busratio
Valid Argument max, 6.0x, 7.0x, 7.5x, 8.0x, 8.5x, 9.0x, 9.5x
Description Sets the bus ratio in CPU.
--camera
Valid Argument enable, disable
Description Enables or disables the camera.
--canbus
Valid Argument enable. disable
Description Enables or disables the Controller Area Network (CAN) Bus.
--cellularradio
Valid Argument enable, disable
Description Enables or disables the cellular radio, also called as the Wireless Wide Area Network (WWAN)
module.
--charger
Valid Argument
enable, disable
Description
Enables or disables the battery charging system.
NOTE: When the system is turned o, the battery charger is enabled.
--chasintrusion
Valid Argument
enable, disable, silentenable
Description Enables or disables the system to detect and report chassis intrusion events to the system display
on boot-up.
--chassisintrustatus
Valid Argument
dooropen, tripped, doorclosed, tripreset
Description
Displays the status of chassis intrusion. All the values are read-only except tripreset.
• dooropen — Indicates chassis door is opened.
• tripped — Indicates the chassis door is opened since the last time the sensor detection logic
was reset.
• doorclosed — Indicates chassis door is closed.
• tripreset — Resets the sensor detection logic to detect the next closed-to-open transition on
the chassis door.
38