Reference Guide
--audiomode
Valid Argument disable, halfduplex, fullduplex
Description
Sets the audio mode to any of the following values:
• disable — Completely releases the onboard hardware resources.
• halfduplex — Allows only record or playback at a time.
• fullduplex — Allows record and playback simultaneously.
--autoon
Valid Argument disable, weekdays , everyday, selectdays
Description
Congures the auto on option for a system. Using this option you can congure the days on which
the system has to turn on automatically.
• disable — Disables the auto on function on the system.
• everyday — Enables the auto on function on every day of the week.
• weekdays — Enables the auto on function on week days.
• selectdays — Enables the auto on function on selected days of the week. The system
disables the auto on function on the days that are not selected.
Example
C:\>cctk --autoon=disable
autoon=disable
--autoonhr
Valid Argument
integers ranging from 0 to 23
Description Sets the auto on conguration in hours.
Example
C:\>cctk --autoonhr=5
autoonhr=5
--autoonmn
Valid Argument
integers ranging from 0 to 59
Description Sets the auto on conguration in minutes.
Example
C:\>cctk --autoonmn=30
autoonmn=30
--autowakeperiod
Valid Argument
integers ranging from 0 to 254
Description
Denes the time after which the system should automatically wake up from Standby, Hibernate, or
Switched o mode.
NOTE: The system wakes up from Sleep, Hibernate, or Switched o mode only if the
autoon (AutoOn) option is enabled for everyday of the week.
30