Reference Guide
--adimodechannel6
Valid Argument unused, adcinput, dacoutput, dacandadc, gpio
Description
Sets the dened Analog/Digital Interface mode for channel 6.
• unused - Channel is unused.
• adcinput - Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• dacoutput - Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• dacandadc - Sets the channel mode as DAC output, but can be monitored through ADC input.
• gpio - Sets the channel mode as General Purpose Input or Output.
--adimodechannel7
Valid Argument unused, adcinput, dacoutput, dacandadc, gpio
Description
Sets the dened Analog/Digital Interface mode for channel 7.
• unused - Channel is unused.
• adcinput - Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• dacoutput - Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• dacandadc - Sets the channel mode as DAC output, but can be monitored through ADC input.
• gpio - Sets the channel mode as General Purpose Input or Output.
--adimodechannel8
Valid Argument
unused, adcinput, dacoutput, dacandadc, gpio
Description
Sets the dened Analog/Digital Interface mode for channel 8.
• unused - Channel is unused.
• adcinput - Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• dacoutput - Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• dacandadc - Sets the channel mode as DAC output, but can be monitored through ADC input.
• gpio - Sets the channel mode as General Purpose Input or Output.
--adjcacheprefetch
Valid Argument
enable, disable
Description
Enables or disables the adjacent cache line prefetch.
• enable — The processor fetches the cache line containing the currently requested data, and
pre-fetches the following cache line.
• disable —The processor fetches only the cache line containing the currently requested data.
--admsetuplockout
Valid Argument
enable, disable
Description
Enables or disables the admin setup lockout.
• enable — If administrator password is set for the system, user can view the setup screens
only after entering the correct administrator password. If administrator password is not set,
user can view the setup screens.
26