Release Notes

Issue: Blinkpsu1led and Blinkpsu2led missing in the .ini le or SCE

Description: Blinkpsu1led and Blinkpsu2led will not be present in the .ini le or SCE as they are enable-only tokens and they are

active only for few seconds. These tokens cannot be modied using GUI.

Issue: advsm option displays the status as Other

Description: If any of the fans is not working, the advsm option displays the status as Other.

Issue: Advance Battery Charge and Peak Shift Charge options display Disable

Description: Platforms that do not support Advance Battery Charge option, when advbatterychargecfg option is enumerated, the

system displays the option as Disable.

Platforms that do not support Peak Shift Charge option, when peakshiftcfg option is enumerated, the system displays the option

as Disable.

Issue: Temperature probe in Advanced System Management option displays as Unknown

Description: On some platforms that support Advanced System Management option, temperature probe of all the sensors displays

as Unknown.

NOTE: This issue will be addressed in the upcoming BIOS versions.

Issue: On some of the platforms that support Advanced System Management option,

temperature probe of Memory sensor 2 displays the current status as Non-Critical instead of

Normal.

NOTE: This issue is addressed in the upcoming BIOS versions.

Issue: On some of the platforms that support Advanced System Management option, when you

set non-critical upper threshold values for cooling device, the CLI indicates that the action

failed; however, setting the same is successful.

Issue: Unable to congure ASM (advsm) BIOS options in .ini le/SCE

Description: While conguring ASM (advsm) option using .ini le, or SCE, Setup password or System password should not be set or

modied.

Known Issues: Graphical User Interface

Issue: Unexpected Error at System.xml.

Description: Dell Command | Congure GUI supports only printable characters for its text-entry elds. If the BIOS has non-printable

characters, the GUI may fail to load and display the following error message: Unexpected Error at System.xml.

Resolution: Make sure that BIOS options such as asset, and propowntag values do not contain non-printable characters.

Issue: Unexpected Error

Description: Rarely, when .NET libraries may not have loaded properly, while exporting the SCE the following error message is

displayed: Unexpected Error.

NOTE: This does not aect the Dell Command | Congure functionality

Resolution: Export the SCE again, and it will be successful.