Release Notes

– Allowing or restricting the system to boot from SD card. See --sdcardboot option.

– Conguring the read-only mode for SD card. See --sdcardreadonly option.

– Congures Secure Guard Extensions (SGX) feature. See --secureguardext option.

– Indicating that the power button has been pressed during POST. See --signoifeindication option.

– Determining which sleep mode to be used by the operating system. See --sleepmode option.

– Conguring the boot ow for SupportAssist OS recovery tool in the event of certain system errors. See --

supportassistosrcvry option.

– Deleting the service OS non-volatile region. See --svcosclear option.

– Allows or restricts the thermal event log to be cleared on the next boot. See --thermallogclear option.

– Conguring the thunderbolt controller in the system. See --thunderbolt option.

– Conguring the thunderbolt security level. See --thunderboltsecuritylevel option.

– Conguring the maximum power for type-C connector. See --typecbtryovrldprotection option.

– Determining whether the system should prompt the user to enter the Admin password, if set, while booting from a UEFI boot

path from the F12 Boot Menu. See --uebootpathsecurity option.

– Conguring the provisioning of Intel AMT from a USB storage device. See --usbprovision option.

– Conguring the USB wake from s4 power state of the system. See --usbwakefroms4 option.

• Support for additional possible values for the following attributes:

– --cpucore

– --speaker

– --primaryvideodeviceslot

– --processorcorecount

• Withdrawal of support for the following attributes:

– --clearsel

– --speakervol

NOTE: For more details on CLI options, see

Dell Command | Congure Command Line Interface Reference Guide

available at dell.com/dellclientcommandsuitemanuals.