Reference Guide

--uuid
Valid Argument Read-only
Description Reports the Universally Unique Identifier (UUID) for a system. The UUID is a unique system
identifier used in PXE requests.
--vaconfiglock
Valid Argument unlock, lock
Description Sets the Intel Virtual Appliance Configuration lock.
--valsetuppwd
Valid Argument <password>
Description Validates the setup password while setting a value in the BIOS. This is applicable only if you set a
setup password or both setup password and system password.
--valsyspwd
Valid Argument <password>
Description Validates the system password while setting a value in the BIOS. This is applicable only if you set a
system password and did not set a setup password.
--vaphysicalpresenceconfirm
Valid Argument
on, off
Description Sets the VA Physical Presence Confirmation. If set to off, it will allow VA install application to
make virtual appliance configuration changes without rebooting. If set to on, it forces VA install
application to reboot the system to make virtual appliance configuration.
--vgadacsnoop
Valid Argument
enable, disable
Description Enables or disables the Video Graphics Array (VGA) Digital-to-Analog Converter (DAC) Snoop in
BIOS.
--videoexpsn
Valid Argument
enable, disable
Description Enables or disables the video expansion.
--videomemsize
Valid Argument
auto, off, 12 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB
Description Sets the video memory size to the specified value. These arguments are used to configure the
amount of memory allocated to the onboard video chipset.
84