Reference Guide

--tpmppipo
Valid Argument enable, disable
Description Enables or disables physical presence for the TPM ACPI PPI provision operations.
--trustexecution
Valid Argument on, off
Description Sets the Intel Trusted Execution Technology.
--turbomode
Valid Argument enable, disable
Description Enables or disables single core-based turbo mode. When enabled, Intel Turbo Boost Technology
allows processor(s) to run at frequencies higher than the advertised frequency.
--typecbtryovrldprotection
Valid Argument 7.5, 15
Description
Configures the maximum power (in Watts) for type-C connector.
--uartpowerdown
Valid Argument
on, off
Description Enables the operating system to power down Universal Asynchronous Receiver/Transmitter
(UART) or disables the operating system from powering down UART.
--uefibootpathsecurity
Valid Argument
alwaysexceptinternalhdd, always, never
Description
Determines whether the system should prompt the user to enter the Admin password, if set,
while booting from a UEFI boot path from the F12 Boot Menu.
• alwaysexceptinternalhdd — All UEFI boot paths require the user to enter the Admin
password, except for the boot paths that are hosted on an internal hard disk drives.
• always — Booting from any UEFI boot path requires the user to enter the Admin password.
• never — The Admin password is not required for booting from UEFI boot paths.
--ueficapsule
Valid Argument
enable, disable
Description Enables or disables BIOS updates via UEFI capsule update packages.
NOTE: Disabling this option blocks the BIOS updates from services such as Microsoft
Windows Update and Linux Vendor Firmware Service (LVFS).
78