Reference Guide

--touchscreen
Valid Argument enable, disable
Description Enables or disables the touchscreen of the device.
--tpm
Valid Argument on, off
Description Turns the Trusted Platform Module (TPM) on or off.
--tpmactivation
Valid Argument activate, deactivated
Description Remotely activates the TPM depending on certain security criteria. The deactivated option is a
read-only argument for reporting the current activation state of the TPM.
To activate TPM,
• Password must be set
• TPM must not be owned
• TPM must be deactivated
For more information, see Dell Command | Configure User’s Guide at dell.com/
dellclientcommandsuitemanuals.
--tpmhashalgo
Valid Argument
sha1, sha256, sha384, sha512
Description Sets the hash algorithm used for TPM 2.0 measurements.
• sha1 — Sets hash algorithm to SHA-1
• sha256 — Sets hash algorithm to SHA-256
• sha384 — Sets hash algorithm to SHA-384
• sha512 — Sets hash algorithm to SHA-512
NOTE: This value cannot be changed if TPM is already owned.
--tpmppiacpi
Valid Argument
enable, disable
Description Enables or disables the Physical Presence Interface (PPI) commands for TPM ACPI.
--tpmppidpo
Valid Argument
enable, disable
Description Enables or disables physical presence for the TPM ACPI PPI deprovision operations.
77