Reference Guide

tertideslav
Valid Argument auto, off
Description
Sets the tertiary IDE slave to off or auto.
--biossetupadvmode
Valid Argument enable, disable
Description
Enabling BIOS Setup Advanced Mode makes all BIOS settings visible.
--thermallogclear
Valid Argument enable, disable
Description
Prevents or allows the thermal event log to be cleared on the next boot.
• disable — Does not clear the thermal event log on the next boot.
• enable — Clears the thermal event log on the next boot.
--thunderbolt
Valid Argument
enable, disable
Description
Enables or disables the thunderbolt controller in the system.
--thunderboltbootsupport
Valid Argument
enable, disable
Description Enables or disables booting from the Thunderbolt device.
--thunderboltprebootmodule
Valid Argument
enable, disable
Description Enables or disables OROMs and pre-boot UEFI drivers provided by Thunderbolt devices or PCIe
devices.
--thunderboltsecuritylevel
Valid Argument
nosecurity, userauthorization, secureconnect, displayport
Description
Configures the thunderbolt security level.
• nosecurity — Disables the thunderbolt security.
• userauthorization — Allows minimum user notification. Connection manager requests
connection approval from the host software, based on the unique ID of the connecting
device, auto approval might or might not be given.
• secureconnect — Allows one-time saved key device. Connection manager requests
connection approval from the host software; approval is given only if the host challenge to
device is acceptable.
• displayport — Allows to connect only display port.
76