Reference Guide

--standbystate

Valid Argument s1, s3

Description Sets the system to ACPI S1 or S3 sleeping state when the systems enters standby mode.

--stealthmode

Valid Argument enable, disable

Description Sets the operation mode of the system elements. If enabled, the system elements operate in the

pre-programmed stealth mode. If disabled, the system elements operate in the normal mode. For

example,

• If stealth mode is enabled and the device stealth mode is set to turnoff, it turns the device off

while pressing Fn+F7 keys.

• If the stealth mode is enabled and the device stealth mode is set to unchanged, then the

device retains its status and remains unchanged while pressing Fn+F7 keys..

• If the stealth mode is disabled, then the state of the device cannot be changed by the

individual device stealth modes.

Following are the system elements that have effect of stealth mode on them:

• --bluetoothstealthmode

• --fanstealthmode

• --gpsstealthmode

• --lcdstealthmode

• --ledstealthmode

• --speakersstealthmode

• --wigigradiostealthmode

• --wlanstealthmode

• --wwanstealthmode

--strongpwd

Valid Argument

enable, disable

Description Enables to enforce a strong password.

--supportassistosrcvry

Valid Arguments

enable, disable

--surroundview

Valid Argument

enable, disable

Description Enables or disables SurroundView to use an additional AMD PCIE video card in conjunction with

the onboard graphics card that allows to use multiple monitors concurrently. It is applicable only

on the AMD platform.