Reference Guide

--gpsstealthmode
Valid Argument unchanged, turnoff
Description
Configures the state of the GPS radio depending on the Stealth mode is enabled or disabled.
• unchanged— Retains the current state of the GPS radio.
• turnoff— Turns off the GPS radio if the Stealth mode is enabled.
--hdd1fanenable
Valid Argument enable, disable
Description Enables or disables the error checking on the FAN_HDD1 fan controller.
--hdd2fanenable
Valid Argument enable, disable
Description Enables or disables the error checking on the FAN_HDD2 fan controller.
--hdd3fanenable
Valid Argument enable, disable
Description Enables or disables the error checking on the FAN_HDD3 fan controller.
NOTE: If the fan controller detects a fan, it automatically enables it.
--hddacousticmode
Valid Argument
bypass, quiet, suggested, performance
Description Sets the hard disk acoustic mode. If set to bypass , BIOS does not modify the currently set
acoustic mode of the hard disks. Quiet sets the acoustic mode of the hard disks to the quietest
operation. Suggested sets the acoustic mode of the hard disks to the setting suggested by the
manufacturer. Performance sets the acoustic mode of the hard disks for the highest disk
performance.
--hddfailover
Valid Argument
on, off
Description Specifies the devices in the hard disk drive sequence menu that are attempted in the boot
sequence. If set to off, only the first device is attempted in the boot sequence. If set to on, all
devices are attempted as listed in the hard disk drive sequence.
--hddinfo
Valid Argument
Read-only
Description
The option displays the details of the HDD. The information displays the name of the HDD (HDD
Name), whether the HDD is physically present (Present), whether a password exists for the
HDD (
Pwd-Protected), whether a reboot is required to set the password (Pending-
45