Reference Guide

NOTE: Onwithimageserverboot is used in the deployment of Dell SmartClient products.
--embnic2
Valid Argument on, off, onnopxe, onwithiscsi, onwithrplboot, onwithimageserverboot
Description Enables or disables the second embedded NIC.
--embsataraid
Valid Argument off, combined, ata, ahci, raid, qdma, smartresponse
Description Configures the embedded Serial ATA (SATA) RAID controller.
--embscsi1
Valid Argument on, off
Description Enables or disables the first Small Computer System Interface (SCSI) controller.
--embscsi2
Valid Argument on, off
Description Enables or disables the second SCSI controller.
--embsdcard
Valid Argument
off, on
Description Enables or disables the embedded Secure Digital (SD) card.
--embvideoctrl
Valid Argument
enable, disable
Description Enables or disables the embedded video controller.
--encalvememorysize
Valid Argument
Read-only
Description Displays the memory allocation size for the Intel Software Guard Extension (SGX) processor
reserved memory.
NOTE: You cannot set the Enclave Reserve Memory Size using the Dell Command |
Configure user interface. One of the methods of setting Enclave Reserve Memory Size
is from the BIOS setup screen.
--energystarlogo
Valid Argument
enable, disable
Description Displays or hides the Energy Star logo during POST.
40