Reference Guide

• unchanged— Retains the current state of the bluetooth.

--bootfailthreshold

Valid Argument 0, 1, 2, 3

Description

Sets the threshold value for auto OS recovery. Controls the automatic boot flow for

SupportAssist System Resolution console and for Dell OS Recovery Tool. The system boots to

the SupportAssist System Resolution console and for Dell OS Recovery Tool if,

• the primary operating system fails to boot consecutively.

• the count of boot failure is greater than or equal to the value of the Auto OS Recovery

threshold setup option.

• SupportAssist OS Recovery option is enabled.

NOTE: If Auto OS Recovery threshold is set to 0, then all automatic boot flow for

SupportAssist System Resolution console and for Dell OS Recovery Tool will be

disabled.

bootorder

Valid Argument None

Description

Displays or sets the boot order sequence, activates boot list, and enables or disables the

supported devices for legacy boot list and for UEFI boot list.

When you run the bootorder option, the following information is displayed:

• device status — The current device status. It may be enabled or disabled.

• device number — A unique number to identify the device on the system.

• device type — The device type.

• short form — Short form of the device. If the system has many devices of the similar device

type, the short form of the device is displayed with a <number> notation. For example, if the

system has an internal Hard Disk Drive (HDD), a USB storage device, and a modular Bay HDD,

the short forms will be displayed as hdd.1, hdd.2, and hdd.3 respectively.

• device description — Description of the device.

Supported devices are:

• floppy — floppy disk

• usbfloppy — USB floppy disk

• hdd — hard disk

• cdrom — CD-ROM

• usbcdrom — USB CD-ROM

• pcmcia — PCMCIA device

• usbdev — USB device

• usbhdd — USB hard disk

• embnic — embedded NIC

• nic — NIC

• usbzip — USB ZIP

• usbdevzip — USB device ZIP

• bev — BEV device

NOTE: For legacy boot list, unknown devices are displayed as hexadecimal values. For

UEFI boot list, some of the devices are displayed as UEFI with a <

number

> notation.

Change the bootorder by providing the short form of the unknown device.