Reference Guide

– Configuring System Isochronous mode. See --isochronous option.

– Configuring the time-out value for the keyboard backlight when an AC adapter is plugged into the system. See --

kbdbacklighttimeoutac option.

– Configuring the time-out value for the keyboard backlight when the system is running only on battery power. See --

kbdbacklighttimeoutbatt option.

– Configuring lid switch functions. See --lidswitch option.

– Configuring the liquid cooler 1. See --liquidcooler1 option.

– Configuring the liquid cooler 2. See --liquidcooler2 option.

– Configuring M2 PCIE SSD 0. See --m2pciessd0 option.

– Configuring M2 PCIE SSD 1. See --m2pciessd1 option.

– Configuring the master password settings. See --masterpwdlockout option.

– – Configuring the time limit value of the memory fault tolerance. See --memfaulttoltimelmt option.

– Configuring Reliability Availability Serviceability (RSA) support on memory modules. See --memoryrsa option.

– Configuring the memory performance monitor feature. See --memperformancemonitor option.

– Configuring the Reliability Availability Serviceability (RSA) support on PCIe devices. See --pciersa option.

– Allows or restricts the power event log to be cleared on the next boot. See --powerlogclear option.

– Configuring the Stealth Mode control of the Intel 8260 card. See --poweroffintel8260stealthmode option.

– Configuring the Dell recovery tool. See --recoverytool option.

– Allowing or restricting the system to boot from SD card. See --sdcardboot option.

– Configuring the read-only mode for SD card. See --sdcardreadonly option.

– Configures Secure Guard Extensions (SGX) feature. See --secureguardext option.

– Indicating that the power button has been pressed during POST. See --signoflifeindication option.

– Determining which sleep mode is to be used by the operating system. See --sleepmode option.

– Configuring the boot flow for SupportAssist OS recovery tool in the event of certain system errors. See --

supportassistosrcvry option.

– Deleting the service OS non-volatile region. See --svcosclear option.

– Allows or restricts the thermal event log to be cleared on the next boot. See --thermallogclear option.

– Configuring the thunderbolt controller in the system. See --thunderbolt option.

– Configuring the thunderbolt security level. See --thunderboltsecuritylevel option.

– Configuring the maximum power for type-C connector. See --typecbtryovrldprotection option.

– Determining whether the system should prompt the user to enter the Admin password, if set, while booting from a UEFI

boot path, from the F12 Boot Menu. See --uefibootpathsecurity option.

– Configuring the provisioning of Intel AMT from a USB storage device. See --usbprovision option.

– Configuring the USB wake from s4 power state of the system. See --usbwakefroms4 option.

• Support for additional possible values for the following attributes:

– --speaker

– --cpucore

– --primaryvideodeviceslot

– --processorcorecount

• Withdrawal of support for the following attributes:

– --clearsel

– --speakervol

Supported systems and operating systems

For the list of business client systems and operating systems supported, see the Release Notes available in the Dell Command |

Configure installation files or at dell.com/dellclientcommandsuitemanuals .