Reference Guide

For example, to set the non-critical threshold values for a current probe on a system with a system password and no setup

password, type:

cctk advsm --set=current_1:10 --valsyspwd = <system password>

For example, to set the non-critical threshold values for a cooling probe on a system with a system password and no setup

password, type:

cctk advsm --set=cd_1:10 --valsyspwd = <system password>

For example, to set the non-critical threshold values for a temperature probe on a system with a system password and no setup

password, type:

cctk advsm --set=temperature_1:10 --valsyspwd = <system password>

PCI reporting

The scan of the PCI bus will use a le to resolve PCI vendor and device codes to vendor information strings. The format of the PCI

output is as follows:

PCI Bus: 2, Device: 4, Function: 0

Vendor: 8086 - Intel Corp.

Device: 1229 - 82557/8/9 [Ethernet Pro 100]

Sub Vendor:8086 - Intel Corp.

Sub Device:1017 - EtherExpress PRO/100+ Dual Port Server Adapter

Slot: 01

Class: 02 - Network

SubClass: 00 - Ethernet

If the le for vendor resolution is not present, the utility will print Unknown next to a vendor name. If the le for environment variable

names is not present, the utility will fail the environment variable operation.

The pci.ids le is located at :

• Systems running on supported Windows operating system:

– For 32-bit systems; C:\Program Files\Dell\Command Congure\X86

– For 64-bit systems; C:\Program Files\Dell\Command Congure\X86_64

• Systems running on supported Linux operating system: /opt/dell/dcc

Completion code

The following table displays the completion code of an update operation performed by BIOS in the recent shutdown or reboot

operation.

Table 8. Completion codes

Code Description

0000h The update was completed successfully.

0001h The image failed one or more consistency checks.

0002h The BIOS could not access the ash-memory device.

0003h The ash-memory device was not ready when an erase was attempted.

0004h Flash programming is currently disabled on the system, or the voltage is low.

0005h A battery must be installed for the operation to complete.

0006h A fully-charged battery must be present for the operation to complete.

0007h An external power adapter must be connected for the operation to complete.