Reference Guide

--wirelessuwb
Valid Argument enable, disable
Description Enables or disables the Wireless On/O switch for Ultra Wide Band (UWB) radio.
--wirelesswitchbluetoothctrl
Valid Argument enable, disable
Description
Enables or disables wireless switch bluetooth control.
• disable — For systems that have a physical Wireless On/O Switch, switch has no eect on
the state of the Bluetooth radio.
• enable — Switch turns the Bluetooth radio on and o.
--wirelesswitchcellularctrl
Valid Argument enable, disable
Description
Enables or disables wireless switch cellular control.
• disable — If the systems that have a physical Wireless On/O Switch, the switch has no
eect on the state of the cellular radio.
• enable — Switch turns the cellular (WWAN) radio on and o.
--wirelesswitchchanges
Valid Argument
permit, deny
Description Permits or denies wireless switch changes. If the administrator password is not set, this setting
has no eect.
--wirelesswitchnlanctrl
Valid Argument
enable, disable
Description
Enables or disables the wireless switch for the wireless LAN control.
• enable — Switch turns the wireless LAN radio on and o..
• disable — If the systems have a physical Wireless On/O Switch, switch has no eect on the
state of the wireless LAN radio
--wirelesswitchwigigctrl
Valid Argument
enable, disable
Description
Enables or disables the Wireless Gigabit (WiGig) radio control switch on the dock to use the WiGig
physical switch. When disabled, the user cannot control WiGig using the physical switch on the
dock.
--wlanregioncode
Valid Argument
rtw, na, eur, jpn, aus, chn, twn, idn
Description Sets the WLAN code for specic region.
• rtw — (Rest of the World) Sets the WLAN region code for the rest of the world. This option
is selected by default.
88