Reference Guide
--watchdogtimer
Valid Argument enable, disable
Description Enables or disables the system to reboot or reset when the watchdog time expires.
--wicatcherchanges
Valid Argument permit, deny
Description Permits or denies Wi-Fi catcher changes. If the administrator password is not set, this setting will
have no eect.
--wilocator
Valid Argument enable, disable
Description Enables or disables the Wi-Fi locator. When enabled, the locator feature can be activated during
S3 to indicate the presence and intensity of wireless network(s), without fully waking the system.
--wigigradiostealthmode
Valid Argument turno, unchanged
Description
Congures or displays the state of Wireless Gigabit Alliance (WiGig) radio depending on the
Unobtrusive mode or stealth mode is enabled or disabled.
• turno — Turns o the WiGig radio if the Unobtrusive mode or stealth mode is enabled.
• unchanged — Retains the current state of the Wigig radio.
--wirelessadapter
Valid Argument
enable, disable
Description Enables or disables the wireless adapter.
--wirelessdevice
Valid Argument
disable, enablectrlbyapp, enablectrlhotkeyapp
Description
Sets the wireless device.
• disable — Disables wireless devices.
• enablectrlbyapp — Enables controlling by an application such as QuickSet.
• enablectrlhotkeyapp — Enables controlling by the hotkey or by an application such as
QuickSet.
--wirelesslan
Valid Argument
enable, disable
Description
Enables or disables the wireless LAN module.
87