Reference Guide
--usbreardual2stack
Valid Argument enable, disable
Description Enables or disables the second rear dual stack of USB ports if there are two rear dual stacks.
--usbrearquad
Valid Argument on, o
Description Enables or disables rear Quad USB ports or rear triple stack on OptiPlex 740.
--usbwake
Valid Argument enable, disable
Description Enables or disables USB wake setting in the next boot. Any USB input device can generate a wake
event.
--usbwakefroms4
Valid Argument enable, disable
Description
Enables or disables the USB wake from s4 power state of the system.
• enable - Enables the USB wake from s4 power state of the system.
• disable - Disables the USB wake from s4 power state of the system.
--uuid
Valid Argument
Read-only
Description Reports the Universally Unique Identier (UUID) for a system. The UUID is a unique system
identier used in PXE requests.
--vaconglock
Valid Argument
unlock, lock
Description Sets the Intel Virtual Appliance Conguration lock.
--valsetuppwd
Valid Argument
<password>
Description Validates the setup password while setting a value in the BIOS. This is applicable only if you set a
setup password or both setup password and system password.
--valsyspwd
Valid Argument
<password>
Description Validates the system password while setting a value in the BIOS. This is applicable only if you set a
system password and did not set a setup password.
84