Reference Guide

--tpmhashalgo
Valid Argument sha1, sha256, sha384, sha512
Description Sets the hash algorithm used for TPM 2.0 measurements.
• sha1 — Sets hash algorithm to SHA-1
• sha256 — Sets hash algorithm to SHA-256
• sha384 — Sets hash algorithm to SHA-384
• sha512 — Sets hash algorithm to SHA-512
NOTE: This value cannot be changed if TPM is already owned.
--tpmppiacpi
Valid Argument enable, disable
Description Enables or disables the Physical Presence Interface (PPI) commands for TPM ACPI.
--tpmppidpo
Valid Argument enable, disable
Description Enables or disables physical presence for the TPM ACPI PPI deprovision operations.
--tpmppipo
Valid Argument
enable, disable
Description Enables or disables physical presence for the TPM ACPI PPI provision operations.
--trustexecution
Valid Argument
on, o
Description Sets the Intel Trusted Execution Technology.
--turbomode
Valid Argument
enable, disable
Description Enables or disables single core-based turbo mode. When enabled, Intel Turbo Boost Technology
allows processor(s) to run at frequencies higher than the advertised frequency.
--typecbtryovrldprotection
Valid Argument
7.5, 15
Description
Congures the maximum power (in Watts) for type-C connector.
--uartpowerdown
Valid Argument
on, o
Description Enables the operating system to power down Universal Asynchronous Receiver/Transmitter
(UART) or disables the operating system from powering down UART.
78