Reference Guide

To change the password:
C:\>cctk --syspwd=<old-password> --valsyspwd=<new-password>
To remove the password:
C:\>cctk --syspwd= --valsyspwd=<old-password>
--sysrev
Valid Argument Read-only
Description Displays the system revision.
--tabletbuttons
Valid Argument enable, disable
Description Enables or disables tablet buttons.
--tertidemast
Valid Argument auto, o
Description
Sets the tertiary IDE master to o or auto.
tertideslav
Valid Argument
auto, o
Description
Sets the tertiary IDE slave to o or auto.
--biossetupadvmode
Valid Argument
enable, disable
Description
Enabling BIOS Setup Advanced Mode makes all BIOS settings visible.
--thermallogclear
Valid Argument
enable, disable
Description
Prevents or allows the thermal event log to be cleared on the next boot.
• disable — Does not clear the thermal event log on the next boot.
• enable — Clears the thermal event log on the next boot.
--thunderbolt
Valid Argument
enable, disable
Description
Enables or disables the thunderbolt controller in the system.
76