Reference Guide
--sleepmode
Valid Argument osautoselection, forces3
Description
Determines which sleep mode to be used by the operating system.
NOTE: The BIOS can only support either Modern Standby sleep mode (connected or
disconnected), or S3 sleep mode.
• osautoselection — Allows the operating system to select the appropriate sleep mode
automatically.
• forces3 — Forces the operating system to use the S3 sleep mode only.
--sma
Valid Argument enable, disable
Description Enables or disables the processor sequential memory access.
--smartcardreader
Valid Argument enable, disable
Description Enables or disables the smart card reader.
--smartcpu
Valid Argument
enable, disable
Description
Enables or disables system’s smart CPU during low system activity.
--smarterrors
Valid Argument
enable, disable
Description Enables or disables SMART errors.
--snooplter
Valid Argument
enable, disable
Description Enables or disables the snoop lter option from the system BIOS.
--speaker
Valid Argument
on, o, low, medium, high
Description
Turns the built-in speakers on or o.
• on — turns on the built-in speaker. The speaker is enabled at the single system-supported
volume.
NOTE: This should be used only if low/medium/high attributes are not supported by
the system.
• o — turns o the built-in speaker.
• low — Sets the volume of the built-in speaker to low.
• medium — Sets the volume of the built-in speakers to medium.
72