Reference Guide

--primarybatterycfg
Valid Argument standard, express, ac, auto, custom
Description Congures the primary battery charging.
• standard — Charges the battery over a longer period of time.
• express — Charges the battery using the express charging algorithm, Dell's fast charging
technology.
• ac — Charges battery while plugged-in.
• auto — Charges the battery based on a periodic evaluation of battery usage to deliver the
best balance capacity.
• custom — The battery charging starts and stops based on user input. The start value range
should be 50-95 percentage, the stop value range should be 55-100 percentage, and the
dierence between the start and stop values should be greater than or equal to 5.
Example
C:\>cctk --primarybatterycfg=standard
primarybatterycfg=standard
NOTE: The format to set custom option is custom:start value-stop value. The
start value range must be 50–95 percentage and the stop value range must be 55–100
percentage. The dierence between the start and stop values must be greater than or
equal to 5.
--primaryvideodeviceslot
Valid Argument
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
Description
Conguring the slot for Primary video display.
• 0 — Scans PCI buses and uses the rst video device slot found with video card as a primary
video device slot.
• 1-15 — Sets the specied slot number as a primary video device slot.
NOTE: If a video card is not available in the specied slot number, the system will scan
the PCI buses and uses the rst video device slot, found with video card as a primary
video device.
Example
C:\>cctk --primaryvideodeviceslot=0
primaryvideodeviceslot=0
--primidemast
Valid Argument
auto, o
Description Enables or disables primary IDE master channel.
--primideslav
Valid Argument
auto, o
Description Enables or disables primary parallel IDE slave channel.
65