Reference Guide
– unlock and access hard disk drive
– erase data from hard disk drive
NOTE: One of the methods of conguring Master Password Lockout feature is from the
BIOS setup screen.
--mediacard
Valid Argument enable, disable
Description Enables or disables the media card.
--mediacardand1394
Valid Argument enable, disable
Description Enables or disables the media card and 1394 devices.
--mem
Valid Argument Read-only
Description Displays the amount of system memory physically installed in the system, not the amount of
memory available to an operating system. The last two characters of the memory value indicate
the order of magnitude used (Kilo Byte (KB) or Mega Byte (MB)).
--memdiagnostic
Valid Argument
enable, disable
Description
Enables or disables the memory diagnostic.
--memfaulttoltimelmt
Valid Argument
0 to 36000 — in 1/10th of a second
Description
Congures the time limit value of the memory fault tolerance.
NOTE: Memory fault tolerance feature is disabled when the value is set to 0.
--memintleave
Valid Argument
enable, disable
Description
Enables or disables memory interleave mode.
--memoryrsa
Valid Argument
enable, disable
Description
Enables or disables the Reliability Availability Serviceability (RSA) support on memory modules.
55