Reference Guide
--hddinfo
Valid Argument Read-only
Description
The option displays the details of the HDD. The information displays the name of the HDD (HDD
Name), whether the HDD is physically present (Present), whether a password exists for the
HDD (
Pwd-Protected), whether a reboot is required to set the password (Pending-
Restart), and whether the changes to the password can be made only by an administrator
(Admin-only-change).
Example
C:\>cctk --hddinfo
HDD Information in the current system.
Index: 0
HDD Name: Internal
Present: Yes
Pwd-Protected: No
Pending-Restart: No
Admin-only-change: No
--hddprotection
Valid Argument on, o
Description Turns the HDD protection feature on or o. The Hard Disk Protection is an advanced feature
intended to keep the HDD data secure and unchangeable. For more details on this feature, see the
documentation provided with your system.
--hddpwd
Valid Argument
<password>
Description Sets the hard disk drive password. The password cannot be reported. To set the password an
argument is required. To remove the password, provide one blank space and the old password.
NOTE: Reboot the system to complete any HDD password actions.
--hdfreefallprotect
Valid Argument
enable, disable
Description Enables or disables hard drive free fall protection.
--hotdock
Valid Argument
enable, disable
Description Enables or disables hot docking or undocking.
--htassist
Valid Argument
enable, disable
Description Enables or disables the Probe Filter chipset option in the BIOS setup. The chipset feature aects
the performance of some applications.
46