Reference Guide
--gpsradio
Valid Argument enable, disable
Description
Enables or disables the internal Global Positioning System (GPS) radio.
• enable — Enables the internal GPS radio.
• disable — Disables the internal GPS radio.
--gpsstealthmode
Valid Argument unchanged, turno
Description
Congures the state of the GPS radio depending on the Stealth mode is enabled or disabled.
• unchanged— Retains the current state of the GPS radio.
• turno— Turns o the GPS radio if the Stealth mode is enabled.
--hdd1fanenable
Valid Argument enable, disable
Description Enables or disables the error checking on the FAN_HDD1 fan controller.
--hdd2fanenable
Valid Argument
enable, disable
Description Enables or disables the error checking on the FAN_HDD2 fan controller.
--hdd3fanenable
Valid Argument
enable, disable
Description Enables or disables the error checking on the FAN_HDD3 fan controller.
NOTE: If the fan controller detects a fan, it automatically enables it.
--hddacousticmode
Valid Argument
bypass, quiet, suggested, performance
Description Sets the hard disk acoustic mode. If set to bypass , BIOS does not modify the currently set
acoustic mode of the hard disks. Quiet sets the acoustic mode of the hard disks to the quietest
operation. Suggested sets the acoustic mode of the hard disks to the setting suggested by the
manufacturer. Performance sets the acoustic mode of the hard disks for the highest disk
performance.
--hddfailover
Valid Argument
on, o
Description Species the devices in the hard disk drive sequence menu that are attempted in the boot
sequence. If set to o, only the rst device is attempted in the boot sequence. If set to on, all
devices are attempted as listed in the hard disk drive sequence.
45