Reference Guide

--brightnessac
Valid Argument
Integers ranging from 0 to 15
Description
Sets the panel brightness to be used when the system is using AC power. 0 sets the panel
brightness to 0%, and 15 sets the panel brightness to 100%.
--brightnessbattery
Valid Argument Integers ranging from 0 to 15
Description
Sets the panel brightness to be used when the system is using battery power only. 0 means panel
brightness will be 0%, and 15 means panel brightness will be 100%.
--busratio
Valid Argument max, 6.0x, 7.0x, 7.5x, 8.0x, 8.5x, 9.0x, 9.5x
Description Sets the bus ratio in CPU.
--camera
Valid Argument enable, disable
Description Enables or disables camera.
--canbus
Valid Argument
enable. disable
Description Enables or disables the Controller Area Network (CAN) Bus.
--cellularradio
Valid Argument
enable, disable
Description Enables or disables the cellular radio, also called as the Wireless Wide Area Network (WWAN)
module.
--charger
Valid Argument
enable, disable
Description
Enables or disables the battery charging system.
NOTE: When the system is turned o, the battery charger is enabled.
--chasintrusion
Valid Argument
enable, disable, silentenable
Description Enables or disables the system to detect and report chassis intrusion events to the system display
on boot-up.
35