Dell Command | Configure Version 3.2.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2009 - 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction..................................................................................................................... 5 Accessing Dell Command | Configure installer.................................................................................................................... 5 Installation prerequisites......................................................................................................................................................
Upgrading Dell Command | Configure using Snap package............................................................................................... 18 8 Dell Command | Configure for Microsoft Windows PE................................................... 19 Creating a bootable image preinstallation environment using Microsoft Windows PE 4.0, 5.0, and 10.0.............................19 Integrating the Dell Command | Configure directory structure into an ISO file using Microsoft Windows PE 10.0.......
1 Introduction Dell Command | Configure is a packaged software application that provides BIOS configuration capability to business-client platforms. Configure the client systems using one of the two methods: using the Graphical User Interface (GUI) or the Command Line Interface (CLI). This guide provides the installation instructions for Dell Command | Configure . Dell Command | Configure supports following Microsoft Windows and Linux operating systems: Windows 7, Windows 8, Windows 8.
• Root login privileges. The Dell Command | Configure installation file, available at: Canonical store for Ubuntu Core 16. • Snap package version 2.23 or later. • Root login privileges. Supported Operating Systems Dell Command | Configure supports the following operating systems: • Microsoft Windows 10 Core (32-bit and 64-bit) • Microsoft Windows 10 Pro (64-bit) • Microsoft Windows 10 Enterprise (32-bit and 64-bit) • Microsoft Windows 8.1 Enterprise (32-bit and 64-bit) • Microsoft Windows 8.
Installing HAPI on the systems running Microsoft Windows 1. Browse to the HAPI directory: • 2. For 32-bit systems: C:\Program Files\Dell\Command Configure\x86 • For 64-bit systems: C:\Program Files (x86)\Dell\Command Configure\x86_64 Run the HAPIInstall.bat file. The command prompt screen is briefly displayed, and then closes. Uninstalling HAPI from the systems running Microsoft Windows 1. Browse to the HAPI directory: • 2. For 32-bit systems: C:\Program Files\Dell\Command Configure\x86 • For 64-bi
2 Installing Dell Command | Configure on systems running Microsoft Windows You can install Dell Command | Configure from the downloaded Dell Update Package (DUP) using the GUI, or perform a silent and unattended installation. You can perform both types of installation using the DUP or a .MSI file. NOTE: Microsoft .NET 4.0 or later must be installed on the client system for Dell Command | Configure GUI installation. NOTE: If User Account Control (UAC) is enabled on Windows 7, Windows 8, Windows 8.
• 1041.mst • 1043.mst • 2052.mst • 3076.mst • Command_Configure.msi • mup.xml 5. • package.xml To access the Dell Command | Configure installation wizard, double-click Command_Configure.msi. 6. Run the installation wizard. For more information, see Running the installation wizard. After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information on configuring the systems, see the following documents at dell.
NOTE: For more information on using commands, type the following command: Dell-CommandConfigure__WIN_3.2.1._A00.EXE. Installing Dell Command | Configure in silent mode using the MSI file Dell Command | Configure can be installed in silent mode in the default folder or a custom folder. • Installing in the default folder • Installing in a custom folder Installing in the default folder 1.
3 Installing Dell Command | Configure on systems running Linux NOTE: Dell Command | Configure GUI is not supported on systems running the Linux operating system. 1. From dell.com/support, download the command_configure-linux-3.2.1-.tar.gz file. 2. Untar the file using the following command: tar -zxvf command_configure-linux-3.2.1-.tar.gz 3. NOTE: • If you have downloaded the package for RHEL, then you have the RPMs available in the package.
Installing Dell Command | Configure on systems running Ubuntu Desktop You can install Dell Command | Configure running Ubuntu Desktop operating system using the Deb package downloaded from dell.com/support. See Accessing Dell Command | Configure installer. 1. From dell.com/support, download the command_configure-linux-3.2.1-.tar.gz. 2. Untar the file using the following command: command_configure-linux-3.2.1-.x64.tar.gz 3. command_configure-linux-3.2.0-.tar.
4 Uninstalling Dell Command | Configure on systems running Microsoft Windows Do the following: • Click Start → Control Panel → Programs And Features. Select Dell Command | Configure, and then click Uninstall.
5 Uninstalling Dell Command | Configure on systems running Linux To uninstall Dell Command | Configure on systems running Red Hat Enterprise Linux 7, or 6, you must run different RPMs. Related links: • Uninstalling Dell Command | Configure on systems running Red Hat Enterprise Linux 7 • Uninstalling Dell Command | Configure on systems running Red Hat Enterprise Linux 6 • Uninstalling Dell Command | Configure on systems running Ubuntu Desktop 16.
3. To verify that the Dell Command | Configure is uninstalled in your system, run dpkg –l | grep command-configure If Dell Command | Configure details are not displayed, then the uninstallation is successful.
6 Upgrading Dell Command | Configure on systems running Microsoft Windows You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the MSI file. NOTE: Microsoft .NET Framework 4 or later must be installed on the client system to ensure a successful Dell Command | Configure GUI installation. NOTE: If Microsoft Windows User Account Control (UAC) is enabled on Windows 7, Windows 8, Windows 8.1, and Windows 10 systems, you cannot install Dell Command | Configure in silent mode.
7 Upgrading Dell Command | Configure on systems running Linux For minor upgrades like upgrading Dell Command | Configure (formerly Dell Client Configuration Toolkit): 1. From dell.com/support, download the command_configure-linux-3.2.1-.tar.gz file and save it on your system. 2. Untar the file using the following command: tar -zxvf command_configure-linux-3.2.1-.tar.gz. 3. Upgrade the version of Dell Command | Configure on the system.
3. To upgrade, run the following command: dpkg -i command configure-linux-3.2.1-.x64.deb 4. To verify the current Dell Command | Configure version, go to the default installation path and run ./cctk --version Upgrading Dell Command | Configure using Snap package To install Dell Command | Configure from a local directory, 1. Log in to the Gateway system. Default username/password: admin/admin 2.
8 Dell Command | Configure for Microsoft Windows PE Windows Preinstallation Environment (Windows PE) provides a standalone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 2.0 and 3.
Creating a Microsoft Windows PE 10.0 64-bit image 1. Browse to C:\Program Files(x86)\Dell\Command Configure\X86_64. 2. Open the command prompt with administrator privileges. 3. Run the following command: cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1. NOTE: Make sure that the path used in the command is that of the Dell Command | Configure folder. 4. Browse to C:\winpe_x86_64\WIM and copy the ISO image. Creating a Microsoft Windows PE 10.0 32-Bit Image 1. Browse to C:\Program Fi
• Creating Microsoft Windows PE 4.0 64-bit image • Creating Microsoft Windows PE 4.0 32-bit image Creating a Microsoft Windows PE 4.0 64-bit image 1. Browse to C:\Program Files (x86)\Dell\Command Configure\X86_64. 2. Open the command prompt with administrator privileges. 3. Run the following command: cctk_x86_64_winpe_4.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1. NOTE: Make sure that the path used in the command is that of the Dell Command | Configure folder. 4. Browse to C:\winpe_x86_64\wim a
The ISO image and the WIM file are created in the following folder • For a 32-bit system; C:\winPE_x86\WIM • For a 64-bit system; C:\winPE_x86_64\WIM Related Link: • Creating Microsoft Windows PE 3.0 64-bit image • Creating Microsoft Windows PE 3.0 32-bit image Creating a Microsoft Windows PE 3.0 64-bit image 1. Run cctk_x86_64_WinPE_3.bat C:\WinPE3_64bit C:\Progra~2\Dell\Comman~1. NOTE: Make sure that the path used in the command is that of the Dell Command | Configure folder. 2. Browse to C:\Wi
NOTE: To prepare a bootable image for a 64-bit supported system, from the command prompt, browse to the following directory: • For 64-bit system; \Windows AIK\Tools\amd64 • For 32-bit system; \Windows AIK\Tools\i86 Otherwise, \Windows AIK\Tools\PEtools. 2. Run the command: oscdimg –n —b\etfsboot.com \ISO . For example, oscdimg –n –bc:\winPE_x86\et
9 Reference In addition to this guide, you can access the following guides available at dell.com/dellclientcommandsuitemanuals. • Dell Command | Configure User’s Guide • Dell Command | Configure Command Line Interface Reference Guide Accessing documents from the Dell EMC support site You can access the required documents using the following links: • For Dell EMC Enterprise Systems Management documents — Dell.com/SoftwareSecurityManuals • For Dell EMC OpenManage documents — Dell.
