Reference Guide

--uartpowerdown

Valid Argument on, off

Description Enables the operating system to power down Universal Asynchronous

Receiver/Transmitter (UART) or disables the operating system from powering

down UART.

Example

C:\>cctk --uartpowerdown=on

uartpowerdown=on

--uefinwstack

Valid Argument enable, disable

Description Enables or disables the UEFI network protocols that allow the usage of

network card in a preinstallation environment.

Example

C:\>cctk --uefinwstack=enable

uefinwstack=enable

--universalconnect

Valid Argument enable, disable

Description

Allows or denies Windows 95 from re-enumerating when a new dock device

is attached to the system.

• enable — Denies Windows 95 from re-enumerating when a new dock

device is attached to the system.

• disable — Allows Windows 95 from re-enumerating when a new dock

device is attached to the system.

Example

C:\>cctk --universalconnect=enable

universalconnect=enable

--unmanagednic

Valid Argument enable, disable, enablewithpxe

Description

Configures the state of the Onboard Unmanaged Network Interface Card

(NIC).

• enable — Enables the secondary NIC.

• disable — Disables the secondary NIC.

• enablewithpxe — Enables the secondary NIC and supports the PXE for

network boot.

Example

C:\>cctk --unmanagednic=enable

unmanagednic=enable