Reference Guide

Example

C:\>cctk --splashscreen=enable

splashscreen=enable

--sriov

Valid Argument enable, disable

Description Enables or disables BIOS support for Single Root I/O Virtualization (SR-IOV)

devices.

Example

C:\>cctk --sriov=enable

sriov=enable

--standbystate

Valid Argument s1, s3

Description Sets the system to ACPI S1 or S3 sleeping state when the systems enters

standby mode.

Example

C:\>cctk --standby=s1

standby=s1

--stealthmode

Valid Argument enable, disable

Description Sets the operation mode of the system elements. If enabled, the system

elements operate in the pre-programmed stealth mode. If disabled, the

system elements operate in the normal mode. For example,

• If stealth mode is enabled and the device stealth mode is set to turnoff, it

turns the device off while pressing Fn+F7 keys.

• If the stealth mode is enabled and the device stealth mode is set to

unchanged, then the device retains its status and remains unchanged

while pressing Fn+F7 keys..

• If the stealth mode is disabled, then the state of the device cannot be

changed by the individual device stealth modes.

Following are the system elements that have effect of stealth mode on them:

• --bluetoothstealthmode

• --fanstealthmode

• --gpsstealthmode

• --lcdstealthmode

• --ledstealthmode

• --speakersstealthmode

• --wigigradiostealthmode

• --wlanstealthmode

• --wwanstealthmode