Reference Guide

--irsttimer

Valid Argument integers ranging from 0 to 999

Description Configures the timeout value (in minutes) for Intel Rapid Start Technology

(IRST) mode. After the set timeout, the system enters IRST mode from the S3

system sleep mode. The acceptable values are in the range 0-999.

Example

C:\>cctk --irsttimer=5

irsttimer=5

--irmt

Valid Argument enable, disable

Description

Enables or disables Intel Ready Mode Technology (iRMT).

Example

C:\>cctk --irmt=enable

irmt=enable

keyboardbacklightcolor

Description

Enables and configures supported colors on the keyboard backlight for the

rugged systems. Also, displays the active color and sets the color (RGB value)

for customcolor1 and customcolor2.

Valid Argument

None

Suboptions

enablecolor, activecolor, customcolor1, customcolor2

Sub Options

The following are the sub options of keyboardbacklightcolor.

--enablecolor

Valid Argument white, red, green, blue, customcolor1 customcolor2, and none.

Description Displays or enables the supported colors on the keyboard backlight. Press Fn

+C to switch among the enabled colors.

NOTE: If ‘none’ is selected, keyboard backlight color switching by

pressing Fn+C will not be possible. The value ‘none’ cannot be combined

with any other color.

Example

cctk keyboardbacklightcolor --enablecolor=green,blue,red

enablecolor= green,blue,red