Reference Guide

--energystarlogo

Valid Argument enable, disable

Description Displays or hides the Energy Star logo during POST.

Example

C:\>cctk --energystarlogo=enable

energystarlogo=enable

--esataport

Valid Argument auto, off

Description Sets the external Serial ATA (e-sata) port to auto or off.

Example

C:\>cctk --esataport=auto

esataport=auto

--esataports

Valid Argument enable, disable

Description Enables or disables all e-sata ports. If the system supports a dock, this status is

also applicable to all e-sata ports on the dock.

Example

C:\>cctk --esataports=enable

esataports=enable

--expresscard

Valid Argument enable, disable

Description Enables or disables the express card port that allows the user to insert an

express card to configure it.

Example

C:\>cctk --expresscard=enable

expresscard=enable

--expresscharge

Valid Argument enable, disable, once

Description Enables or disables the express charge battery charge algorithm. The once

argument enables the system to use express charge algorithm for one charge

cycle.

Example

C:\>cctk --expresscharge=enable

expresscharge=enable