Reference Guide

--drmt

Valid Argument enable, disable

Description Dell Reliable Memory Technology configures the system to detect and

correct the software errors in a block of RAM. When enabled, the system

detects and corrects the software errors.

Example

C:\>cctk --drmt=enable

drmt=enable

--embideraid

Valid Argument on, off

Description Enables or disables the embedded Integrated Development Environment (IDE)

Redundant Array of Independent Disks (RAID) controller.

Example

C:\>cctk --embideraid=enable

embideraid=enable

--embideraid2

Valid Argument on, off

Description

Enables or disables the second embeded IDE RAID controller.

Example

C:\>cctk --embideraid2=on

embideraid2=on

--embnic1

Valid Argument off, on, onnopxe, onwithiscsi, onwithrplboot, onwithimageserverboot

Description

Defines the state of the built-in NIC.

NOTE: Onwithimageserverboot is used in the deployment of Dell

SmartClient products.

Example

C:\>cctk --embnic1=off

embnic1=off

--embnic2

Valid Argument on, off, onnopxe, onwithiscsi, onwithrplboot, onwithimageserverboot

Description Enables or disables the second embedded NIC.