Reference Guide

--diskettereconfig

Valid Argument anytime, atbootonly

Description Allows the user to hot or warm plug a floppy drive into the system and make it

functional. If set to atbootonly, the drive will be functional after the system is

rebooted. If set to anytime, reboot is not required.

Example

C:\>cctk --diskettereconfig=anytime

diskettereconfig=anytime

--displayclosestate

Valid Argument active, suspend

Description Sets the system to active or suspend state, when the system lid is closed.

• active — system remains in the active state when the system lid is closed.

• suspend — system will be forced to suspend when the system lid is

closed.

Example

C:\>cctk --displayclosestate=active

displayclosestate=active

--dockdisplayport1vs

Valid Argument integrated, external

Description

Configures the source for the High-Definition Multimedia Interface (HDMI)

and display port 1 on the dock.

• integrated— Uses the integrated video controller as video source.

• external — Uses the external video controller as video source.

Example

C:\>cctk --dockdisplayport1vs=integrated

dockdisplayport1vs=integrated

--dramprefetch

Valid Argument enable, disable

Description

Sets the Dynamic Random Access Memory (DRAM) to the following:

• disable — Disables DRAM references from triggering DRAM prefetch

requests.

• enable — Enables DRAM references from triggering DRAM prefetch

requests.

Example

C:\>cctk --dramprefetch=enable

dramprefetch=enable