Reference Guide

• harddiskonly — Sets the devices in the sequence: hard drive and option

ROMs (if available).

• devlist — Sets the devices in the sequence: diskette, CD-ROM, hard drive,

and option ROMs (if available).

• cdromfirst — Sets the devices in the sequence: CD-ROM, diskette, hard

drive, option ROMs (if available).

Example

C:\>cctk --bootseqset=diskettefirst

bootseqset=diskettefirst

--bootspeed

Valid Argument default, compatible

Description Sets microprocessor speed to default or compatible. If set to compatible, the

Central Processing Unit (CPU) speed will be significantly slower. This is

implementation dependent. There is no specific speed for compatible, except

that it is significantly slower than default.

Example

C:\>cctk --bootspeed=default

bootspeed=default

--boottimevideo

Valid Argument onboard, addin

Description

Sets the onboard or first add-in video controller for boot time messages.

• onboard — The onboard video controller is used for boot-time messages.

• addin — The first add-in video controller is used for boot-time messages.

NOTE: Depending on the BIOS search and system slot layout, the first

add-in device changes.

Example

C:\>cctk --boottimevideo=onboard

boottimevideo=onboard

--busratio

Valid Argument max, 6.0x, 7.0x, 7.5x, 8.0x, 8.5x, 9.0x, 9.5x

Description Sets the bus ratio in CPU.

Example

C:\>cctk --busratio=max

busratio=max

--camera

Valid Argument enable, disable

Description Enables or disables camera.