Reference Guide

--agpaperturesize
Valid Argument 8M, 16M, 32M, 64M, 128M, 256M
Description
Sets the Accelerated Graphics Port (AGP) aperture size of Peripheral
Component Interconnect (PCI) address space.
NOTE: The Extended System Configuration Data (ESCD) must be cleared
after the aperture size is changed.
Example
C:\>cctk --agpaperturesize=8M
agpaperturesize=8M
--agpslot
Valid Argument enable, disable
Description Enables or disables on-board AGP slot.
Example
C:\>cctk --agpslot=enable
agpslot=enable
--alarmresume
Valid Argument enable, disable
Description
Allows or prevents the system to resume from the suspended mode.
• enable — System alarm resumes the system from the suspended mode.
• disable — System alarm prevents the system to resume from the suspend
mode.
Example
C:\>cctk --alarmresume=enable
alarmresume=enable
--amblightsen
Valid Argument enable, disable
Description Enables or disables the ambient light sensor.
Example
C:\>cctk --amblightsen=enable
amblightsen=enable
--asfmode
Valid Argument on, off, alertonly, dash
Description Sets the alert standard format.
• on — Turns the ASF mode on.
• off — Turns the ASF mode off.
• alertonly — Enables only error messages.
25