Reference Guide

Example
C:\>cctk --watchdogtimer=enable
watchdogtimer=enable
--wificatcherchanges
Valid Argument permit, deny
Description Permits or denies Wi-Fi catcher changes. If the administrator password is not
set, this setting will have no effect.
Example
C:\>cctk --wificatcherchanges=permit
wificatcherchanges=permit
--wifilocator
Valid Argument enable, disable
Description Enables or disables the Wi-Fi locator. When enabled, the locator feature can
be activated during S3 to indicate the presence and intensity of wireless
network(s), without fully waking the system.
Example
C:\>cctk --wifilocator=enable
wifilocator=enable
--wigigradiostealthmode
Valid Argument turnoff, unchanged
Description
Configures or displays the state of Wireless Gigabit Alliance (WiGig) radio
depending on the Unobtrusive mode or stealth mode is enabled or disabled.
• turnoff — Turns off the WiGig radio if the Unobtrusive mode or stealth
mode is enabled.
• unchanged — Retains the current state of the Wigig radio.
Example
C:\>cctk --wigigradiostealthmode=unchanged
wigigradiostealthmode=unchanged
--wirelessadapter
Valid Argument enable, disable
Description Enables or disables the wireless adapter.
Example
C:\>cctk --wirelessadapter=enable
wirelessadapter=enable
101