Deployment Guide

NOTE: Make sure that the path mentioned in the command directs to the Dell Command |

Configure folder.

4. Browse to C:\winpe_x86\WIM and copy the ISO image.

Integrating Dell Command | Configure directory structure to an ISO file using Microsoft

Windows PE 4.0

1. Install Windows 7 SP1 or Windows 8 operating system.

2. Download and install Windows ADK for Windows 8.

3. Create Windows PE 4.0 image.

Related Links:

• Creating Microsoft Windows PE 4.0 64-bit image

• Creating Microsoft Windows PE 4.0 32- bit image

Creating Microsoft Windows PE 4.0 64-Bit Image

1. Browse to C:\Program Files (x86)\Dell\Command Configure\X86_64.

2. Open the command prompt with Administrator privileges.

3. Run the following command: cctk_x86_64_winpe_4.bat C:\winpe_x86_64 C:

\Progra~2\Dell\Comman~1

NOTE: Make sure that the path mentioned in the command directs to the Dell Command |

Configure folder.

4. Browse to C:\winpe_x86_64\wim and copy the ISO image.

Creating Microsoft Windows PE 4.0 32-bit image

1. Browse to C:\Program Files\Dell\Command Configure\X86.

2. Open the command prompt with Administrator privileges.

3. Run the following command: cctk_x86_winpe_4.bat C:\winpe_x86 C:\Progra~1\Dell

\Comman~1

NOTE: Make sure that the path mentioned in the command directs to the Dell Command |

Configure folder.

4. Browse to C:\winpe_x86\WIM and copy the ISO image.

Creating a bootable image PE using Microsoft Windows PE 2.0 And 3.0

1. From the Microsoft website, download and install Windows AIK on the client system.

2. From dell.com/support, download and install Dell Command | Configure .

3. Integrate the Dell Command | Configure directory structure to an ISO file (for Windows PE 2.0 and

3.0) to create a bootable ISO image.