Release Notes

What’s new in this release

The new features for this release include support for:

• New operating systems: Windows 7 Professional FES, and Windows 10 Enterprise LTSB, Ubuntu

Desktop 16.04.

• New platforms: Dell Embedded Box PC 3000 series, and Dell Embedded Box PC 5000 series.

• Configuring the Dell Type-C Thunderbolt docks to function when the Thunderbolt is disabled. See --

alwaysallowdelldocks option.

• Configuring the BIOS recovery option. See --biosrecovery option.

• Configuring the threshold value for the operating system boot failure. See --bootfailthreshold option.

• Configuring the Controller Area Network (CAN) Bus. See --canbus option.

• Configuring the I/O module. See --iomodule option.

• Configuring the memory allocation size for the Intel Software Guard Extension (SGX) processor

reserved memory. See --enclavememorysize option.

• Configuring onboard sound devices. See --onboardsounddevice option.

• Configuring the number of cores available in the system. See --processorcorecount option.

• Additional possible values for --serial1 and --serial2 options.

• Configuring the 3rd serial port. See --serial3 option.

• Configuring the 4th serial port. See --serial4 option.

• Configuring the 5th serial port. See serial5 option.

• Configuring the 6th serial port. See serial6 option.

• Configuring the system to boot from the Thunderbolt device. See --thunderboltbootsupport option.

• Configuring the OROMs and pre-boot UEFI drivers provided by Thunderbolt devices, or PCIe devices.

See --thunderboltprebootmodule option.

• Configuring the touch screen. See --touchscreen option.

• Configuring the hash algorithm used for TPM 2.0 measurements. See --tpmhashalgo option.

• Configuring BIOS updates via UEFI capsule update packages. See --ueficapsule option.

• Configuring the system to wake when a docking connection is made. See --wakeondock option.

• Configuring the system to continue to boot, or to pause when warnings or errors are detected. See --

warningsanderrors option.

• Configuring the WLAN code for a specific region. See --wlanregioncode option.

NOTE: For more details on CLI options, see Dell Command | Configure Command Line Interface

Reference Guide available at dell.com/dellclientcommandsuitemanuals.