Release Notes

• Latitude E6x30, E5x30

• Dell Precision mobile M4700, M4500

• Dell Precision workstation T1650

• Optiplex 9010, 7010

NOTE: The BIOS configuration on this option works with previous generation of platforms. This

issue will be addressed in the upcoming BIOS versions.

Issue: Blinkpsu1led and Blinkpsu2led missing in the .ini file or SCE

Description: Blinkpsu1led and Blinkpsu2led will not be present in the .ini file or SCE as they are enable-

only tokens and they are active only for few seconds. These tokens cannot be modified using GUI.

Issue: advsm option displays the status as Other

Description: If any of the fans is not working, the advsm option displays the status as Other.

Issue: Advance Battery Charge and Peak Shift Charge options display Disable

Description: Platforms that do not support Advance Battery Charge option, when advbatterychargecfg

option is enumerated, the system displays the option as Disable.

Platforms that do not support Peak Shift Charge option, when peakshiftcfg option is enumerated, the

system displays the option as Disable.

Issue: Temperature probe in Advanced System Management option displays

as Unknown

Description: On some platforms that support Advanced System Management option, temperature probe

of all the sensors displays as Unknown.

NOTE: This issue will be addressed in the upcoming BIOS versions.

Issue: On some of the platforms that support Advanced System Management

option, temperature probe of Memory sensor 2 displays the current status as

Non-Critical instead of Normal.

NOTE: This issue is addressed in the upcoming BIOS versions.

Issue: On some of the platforms that support Advanced System Management

option, when you set non-critical upper threshold values for cooling device,

the CLI indicates that the action failed; however, setting the same is

successful.

Issue: Autoon minutes (autoonmn) is listed in the ‘do not edit’ section in

the .ini file

Description: The .ini file exported from the CLI contains autoonmn option in do not edit section;

however, this option can be configured when such .ini files are imported.