Reference Guide

Example
C:\>cctk --ueficapsule=enable
ueficapsule=enable
--uefinwstack
Valid Argument enable, disable
Description Enables or disables the UEFI network protocols that allow the usage of
network card in a preinstallation environment.
Example
C:\>cctk --uefinwstack=enable
uefinwstack=enable
--universalconnect
Valid Argument enable, disable
Description
Allows or denies Windows 95 from re-enumerating when a new dock device
is attached to the system.
• enable — Denies Windows 95 from re-enumerating when a new dock
device is attached to the system.
• disable — Allows Windows 95 from re-enumerating when a new dock
device is attached to the system.
Example
C:\>cctk --universalconnect=enable
universalconnect=enable
--unmanagednic
Valid Argument enable, disable, enablewithpxe
Description
Configures the state of the Onboard Unmanaged Network Interface Card
(NIC).
• enable — Enables the secondary NIC.
• disable — Disables the secondary NIC.
• enablewithpxe — Enables the secondary NIC and supports the PXE for
network boot.
Example
C:\>cctk --unmanagednic=enable
unmanagednic=enable
--unobstrusivemode
Valid Argument enable, disable
Description Enables or disables the hotkey <Fn> + <B>. When enabled, pressing <Fn>
+ <B> turns off the light and sound emissions of the fans and wireless
radios in the system. To resume normal operations, press <Fn> + <B>
again.
Example
C:\>cctk --unobstrusivemode=enable
unobstrusivemode=enable
90