Reference Guide

Example

C:\>cctk --scndideslave=auto

scndideslave=auto

--scsi3

Valid Argument enable, disable

Description Enables or disables the third built-in SCSI controller.

Example

C:\>cctk --scsi3=enable

scsi3=enable

--secureboot

Valid Argument enable

Description

Enables secure boot authentication. If enabled, BIOS should only perform

Secure Boot authentication and boot in UEFI mode without loading

Compatibility Support Module (CSM). BIOS refers to this setting to decide on

the POST behavior.

NOTE: You cannot disable secure boot using the Dell Command |

Configure user interface. One of the methods of disabling secureboot is

from the BIOS setup screen.

Example

C:\>cctk --secureboot=enable

secureboot=enable

--serial1

Valid Argument disable, auto, com1, com2, com3, com4, com1_bmc, bmcserial, bmclan, rac,

RS232, RS422, RS485

Description Defines the 1st serial port configuration.

Example

C:\>cctk --serial1=disable

serial1=disable

--serial2

Valid Argument disable, auto, com2, com4, RS232, RS422, RS485

Description Defines the 2nd serial port configuration.

Example

C:\>cctk --serial2=disable

serial2=disable

--serial3

Valid Argument

disable, auto, RS232, RS422, RS485

Description Configures the 3rd serial port of the system.