Reference Guide

--primaryvideodeviceslot
Valid Argument 0, 1-15, 255
Description
Configuring the slot for Primary video display.
• 0 — Sets the onboard video device slot as primary video device slot. .
• 1-15 — Sets the specified slot number as a primary video device slot.
• 255 —Scans PCI buses and uses the first video device slot, found with
video card as a primary video device slot.
NOTE: If a video card is not available in the specified slot number, the
system will scan the PCI buses and uses the first video device slot,
found with video card as a primary video device.
Example
C:\>cctk --primaryvideodeviceslot=0
primaryvideodeviceslot=0
--primidemast
Valid Argument auto, off
Description Enables or disables primary IDE master channel.
Example
C:\>cctk --primidemast=off
primidemast=off
--primideslav
Valid Argument auto, off
Description Enables or disables primary parallel IDE slave channel.
Example
C:\>cctk --primideslav=auto
primideslav=auto
--processorcorecount
Valid Argument 0, integer ranging from 1 to the number of cores available in the system
Description
Enables the number of cores in each processor.
• 0 — Enables all cores.
Example
C:\>cctk --processorcorecount=3
processorcorecount=3
--promptonerr
Valid Argument enable, disable
Description Enables or disables the BIOS from prompting for <F1> or <F2> on error.
73