Reference Guide

--pntdevice
Valid Argument externalserialonly, externalps2only, switchtotouchpad, switchtoexternalps2
Description Sets the pointing device.
• externalserialonly — Sets the pointing device to external serial only.
• externalps2only — Sets the pointing device to external ps2 only.
• switchtotouchpad — Sets the pointing device to switch to touch pad.
• switchtoexternalps2 — Sets the pointing device to switch to external ps2.
Example
C:\>cctk --pntdevice=externalserialonly
pntdevice=externalserialonly
--postf12key
Valid Argument enable, disable
Description Enables or disables <F12> boot menu on POST boot screen.
Example
C:\>cctk --postf12key=enable
postf12key=enable
--postf2key
Valid Argument enable, disable
Description Enables or disables <F2> boot menu on POST boot screen.
Example
C:\>cctk --postf2key=enable
postf2key=enable
--posthelpdeskkey
Valid Argument enable, disable
Description Enables or disables display of the <Ctrl> + <h> help desktop hotkey message
on the POST screen if Management Engine (ME) is alive and Client Initiated
Remote Access (CIRA) is supported.
Example
C:\>cctk --posthelpdeskkey=enable
posthelpdeskkey=enable
--postmebxkey
Valid Argument on, off
Description Controls the display of the MEBx hotkey (<Ctrl> + <P>) at POST on the sign-
on screen.
Example
C:\>cctk --postmebxkey=on
postmebxkey=on
71