Reference Guide

--peakshiftcfg

Valid Argument enable, disable

Description

Enables or disables the Peak Shift battery configuration. Using Peak Shift

configuration, you can minimize the consumption of AC power during the

peak power usage period of the day using the enable and disable options. You

can set a start and end time for the Peak Shift period. During this period, the

system runs on battery if the battery charge is above the set battery threshold

value. After the Peak Shift period, the system runs on AC power without

charging the battery. The system functions normally using AC power and

recharging the battery after the specified Charge Start Time.

NOTE: To use peakshiftcfg, set the values of Operate only on

battery, Operate only on AC, and Resume normal power/

charge

are necessary. The values must be set in such a way that Peak

shift start time <= Peak shift end time <= Peak shift charge start time.

NOTE: The value of hour must be in the range 0–23 and minute must be

0,15, 30, or 45. To set 12 a.m., provide the hour value as 00.

Example

To enable Peak Shift battery configuration:

C:\>cctk --peakshiftcfg=enable

peakshiftcfg=enable

To enable Peak Shift battery configuration on specific days for a specific

period:

C:\>cctk --

peakshiftcfg=enable,mon-10:30/14:00/16:00,tue-10:30/14:00/1

6:30

To disable Peak Shift battery configuration:

C:\>cctk --peakshiftcfg=disable

peakshiftcfg=disable

--penmisindication

Valid Argument enable, disable

Description Enables or disables the missing pen indication. This controls tablet PC pen

removal. The pen LED blinks to indicate that the pen has been removed out of

the retaining well.

Example

C:\>cctk --penmisindication=enable

penmisindication=enable

--penresumeon

Valid Argument enable, disable

Description Enables or disables the resume on pen setting.

Example

C:\>cctk --penresumeon=disable

penresumeon=disable