Reference Guide

--pciresallocationratio
Valid Argument allocateevenly, allocatemoretocpu1
Description Allocates PCI resources, buses, memory-mapped I/O (MMIO) space, and I/O
space. If set to allocateevenly, equal amount of memory is allocated to all the
resources when two CPUs are installed. When set to allocatemoretocpu1,
larger amount of device-specific memory is allocated, which in turn reduces
the usable memory on a system with a 32-bit operating system.
Example
C:\>cctk --pciresallocationratio=allocateevenly
pciresallocationratio=allocateevenly
--pcisata
Valid Argument enable, disable
Description Enables or disables the PCI Serial ATA controller.
Example
C:\>cctk --pcisata=enable
pcisata=enable
--pcislots
Valid Argument enable, disable
Description Enables or disables the add-in PCI slots of the system.
Example
C:\>cctk --pcislots=enable
pcislots=enable
--pcmcia
Valid Argument enable, disable
Description Enables or disables the PCMCIA device slot.
Example
C:\>cctk --pcmcia=enable
pcmcia=enable
--peakshiftbatterythreshold
Valid Argument integers ranging from 15 to 100
Description
Sets the value of Peak Shift battery threshold. When the Peak Shift battery
threshold level is reached, the system starts using AC power. Setting the value
to 0 percent, allows the system to use power only from the battery during
Peak Shift duration (Peak Shift Start time and Peak shift End time).
Example
C:\>cctk --peakshiftbatterythreshold=50
peakshiftbatterythreshold=50
69