Reference Guide

--mem

Valid Argument Read-only

Description Displays the amount of system memory physically installed in the system, not

the amount of memory available to an operating system. The last two

characters of the memory value indicate the order of magnitude used (Kilo

Byte (KB) or Mega Byte (MB)).

Example

C:\>cctk --mem

mem=4096 MB

--memdiagnostic

Valid Argument enable, disable

Description

Enables or disables the memory diagnostic.

Example

C:\>cctk --memdiagnostic=enable

memdiagnostic=enable

--memintleave

Valid Argument enable, disable

Description

Enables or disables memory interleave mode.

Example

C:\>cctk --memintleave=enable

memintleave=enable

--memremap

Valid Argument off, auto

Description

Enables or disables memory remapping.

Example

C:\>cctk --memremap=off

memremap=off

memtest

Valid Argument enable, disable

Description

Enables or disables Power-on Self Test (POST) extended memory test.

Example

C:\>cctk --memtest=enable

memtest=enable