Reference Guide

Example

C:\>cctk --gpsstealthmode=turnoff

gpsstealthmode=turnoff

--hdd1fanenable

Valid Argument enable, disable

Description Enables or disables the error checking on the FAN_HDD1 fan controller.

Example

C:\>cctk --hdd1fanenable=enable

hdd1fanenable=enable

--hdd2fanenable

Valid Argument enable, disable

Description Enables or disables the error checking on the FAN_HDD2 fan controller.

Example

C:\>cctk --hdd2fanenable=enable

hdd2fanenable=enable

--hdd3fanenable

Valid Argument enable, disable

Description Enables or disables the error checking on the FAN_HDD3 fan controller.

NOTE: If the fan controller detects a fan, it automatically enables it.

Example

C:\>cctk --hdd3fanenable=enable

hdd3fanenable=enable

--hddacousticmode

Valid Argument bypass, quiet, suggested, performance

Description Sets the hard disk acoustic mode. If set to bypass , BIOS does not modify the

currently set acoustic mode of the hard disks. Quiet sets the acoustic mode

of the hard disks to the quietest operation. Suggested sets the acoustic mode

of the hard disks to the setting suggested by the manufacturer. Performance

sets the acoustic mode of the hard disks for the highest disk performance.

Example

C:\>cctk --hddacousticmode=bypass

hddacousticmode=bypass

--hddfailover

Valid Argument on, off

Description Specifies the devices in the hard disk drive sequence menu that are attempted

in the boot sequence. If set to off, only the first device is attempted in the

boot sequence. If set to on, all devices are attempted as listed in the hard disk

drive sequence.