Reference Guide

--fnlockmode
Valid Argument enable. disable
Description
Controls the behavior of the dual-function keys (<F1> — <F12>), when <Fn>
key is pressed and when it is not.
• enable — Press the function keys to use the primary function of the key.
• disable — Press the function keys to use the secondary function of the
key.
Example
C:\>cctk --fnlockmode=enable
fnlockmode=enable
--forcepxe
Valid Argument enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) as the first boot
device on all subsequent boots.
Example
C:\>cctk --forcepxe=enable
forcepxe=enable
--forcepxeonnextboot
Valid Argument enable, disable
Description
Enables or disables Force PXE on next boot in BIOS.
If enabled, when the BIOS boots next time, the first PXE-capable device is
inserted as the first device in the boot sequence. Enabling this value causes
this operation on the next boot only, and does not cause a change in the
defined boot sequence of the system. The BIOS chooses the first PXE-capable
device as the onboard network controller of the system, if present and
enabled, or the first bootable network device found in the standard PCI search
order of the system- whichever comes first.
If disabled, the boot override feature is disabled and the system boot
sequence is in effect.
Example
C:\>cctk --forcepxeonnextboot=enable
forcepxeonnextboot=enable
--frontpanelerrdisplaymode
Valid Argument aller, firsterr
Description Configures to report all the errors or only the first error on the front panel
Liquid Crystal Display (LCD).
• aller — All errors displayed on front panel LCD.
• firsterr — Only first error displayed on front panel LCD.
46